Recent advances in indium metallurgy: A review

The by-products of zinc refineries are used as the primary mineral resources for the commercial production of indium. The discarded LCDs containing adequate amount of indium is rather worth as its secondary resources compared to the by-products of zinc refineries. Mining and recycling rates of indium, respectively from minerals and waste LCDs are in progress to meet its huge demand. Recycling of the LCDs has been dominating over mining, as presently 480t of indium are produced annually from mining, however, that of 650t annually from recycling. Different aspects of the extractive metallurgy of indium are summarized in this review paper.     

Synthesis and characterization of solid-phase super acid catalysts and their application for isomerization of n-alkanes

In the present work, first, the reference catalyst super acidic nanostructured sulfated zirconia (SZ) and super acidic nanostructured aluminum chloride impregnated sulfated zirconium oxides in mole ratios of Zr⁴⁺:Al³⁺ as 2:1 (ACSZ-1), 1:1 (ACSZ-2), and 1:2 (ACSZ-3) were synthesized by a simple precipitation method. The catalytic performance of these four catalysts were evaluated during the isomerization of n-hexane, n-heptane, and n-octane to their corresponding branched chain isomers at low temperature and pressure conditions. ACSZ-2 shows high activity toward isomerization of n-hexane, n-heptane, and n-octane into their corresponding branched chain isomers. The reference catalyst SZ was proved to be less effective compare to the other three synthesized ACSZ catalysts. Ammonia-temperature-programmed desorption of these two materials ensures that the super acidity of ACSZ-2 is higher than that of SZ. Atomic force microscopic and scanning electron microscopic pictures predict the nature of the surface of the catalysts. Transmission electron micrographic analysis indicates the presence of particle-bulks having average size 12–20?nm, presenting an amorphous nature and having no definite surface morphology of ACSZ-2. Fourier transform infrared provides an outline regarding different linkages and bond connectivities between atoms and groups in ACSZ-2 and SZ. After catalyst evaluation and characterization a probable reaction mechanism has been proposed theoretically. The reactivity and selectivity of ACSZ-2 and SZ as well as the order and activation energy of the isomerization reactions in presence of ACSZ-2 have been calculated. The use of ACSZ-2 is beneficial from the point of cost efficiency as well as its use is energy saving.     

Effect of initial powder type on the hydrogen storage properties of high-pressure torsion consolidated Mg

While severe plastic deformation (SPD) on bulk samples has been widely applied for modifying the H-sorption properties, there has been little attention towards the use of SPD on powder materials. In this context, the aim of the present work was to compare the H-storage properties of high-pressure torsion (HPT) consolidated products obtained from two distinct Mg powder precursors: atomized micro-sized and condensed ultrafine powder particles. The results showed that the nature of the initial powder precursor had a pronounced effect on the H-sorption behavior. The HPT product obtained from the condensed ultrafine powder showed faster absorption kinetics than the consolidated product obtained from the atomized powder. However, the HPT product obtained from atomized powder could absorb more hydrogen and showed faster desorption kinetics corresponding to a lower activation energy. These results are discussed by taking into account the effectiveness of the HPT process to refine the grain sizes and differences in the dispersion of fine MgO oxide particles.     

Buckling and Postbuckling Behavior of Cross-Ply Composite Plate Subjected to Nonuniform In-Plane Loads

This paper presents a study of buckling and postbuckling behaviour of simply supported composite plates subjected to nonuniform in-plane loading. The mathematical model is based on higher order shear deformation theory incorporating von Kármán nonlinear strain displacement relations. Because the applied in-plane edge load is nonuniform, in the first step the plane elasticity problem is solved to evaluate the stress distribution within the prebuckling range. Using these stress distributions, the governing equations for postbuckling analysis of composite plates are obtained through the theorem of minimum potential energy. Adopting Galerkin’s approximation, the governing nonlinear partial differential equations are reduced into a set of nonlinear algebraic equations in the case of postbuckling analysis, and homogeneous linear algebraic equations in the case of buckling analysis. The critical buckling load is obtained from the solution of associated linear eigenvalue problem. Postbuckling equilibrium paths are obtained by solving nonlinear algebraic equations employing the Newton-Raphson iterative scheme. Explicit expressions for the plate in-plane stress distributions within the prebuckling range are reported for isotropic and composite plates subjected to parabolic in-plane edge loading. Buckling loads are determined for three plate aspect ratios (a/b = 0.5, 1, 1.5) and three different types of in-plane load distributions. The effect of shear deformation on the buckling loads of composite plate is reported. The present buckling results are compared with previously published results wherever possible.     

Perspectives on Inhibiting β‐Amyloid Aggregation through Structure‐Based Drug Design

Targeting β‐amyloid (Aβ) remains the most desired strategy in Alzheimer’s disease (AD) drug discovery research. Many peptides that specifically target Aβ aggregates are known, encompassing efforts from both industrial and academic research settings. However, in clinical terms, not much success has been gained with peptide research; in turn, small drug‐like molecules are already globally recognized as showing promise as an alternate approach. Aβ aggregation inhibitors are the most important part of the multifunctional drug design regimen for treating AD. Unfortunately, rational drug design approaches with small molecules are still in the initial stages. Herein we highlight, update, and elaborate on the structural anatomy of Aβ and known Aβ aggregation inhibitors in hopes of helping to optimize their use in structure‐based drug design approaches toward inhibitors with greater specificity. Furthermore, we present the first review of efforts to target a previously uncharacterized region of acetylcholinesterase: the N‐terminal 7–20 sub‐region, which was experimentally elucidated to participate in Aβ aggregation and deposition.     

ARTIFICIAL NEURAL NETWORKS: PRINCIPLE AND APPLICATION TO MODEL BASED CONTROL OF DRYING SYSTEMS - A REVIEW

Abstract

This paper reviews the developments in the model based control of drying systems using Artificial Neural Networks (ANNs). Survey of current research works reveals the growing interest in the application of ANN in modeling and control of non-linear, dynamic and time-variant systems. Over 115 articles published in this area are reviewed. All landmark papers are systematically classified in chronological order, in three distinct categories; namely, conventional feedback controllers, model based controllers using conventional methods and model based controllers using ANN for drying process. The principles of ANN are presented in detail. The problems and issues of the drying system and the features of various ANN models are dealt with upto-date. ANN based controllers lead to smoother controller outputs, which would increase actuator life. The paper concludes with suggestions for improving the existing modeling techniques as applied to predicting the performance characteristics of dryers. The hybridization techniques, namely, neural with fuzzy logic and genetic algorithms, presented, provide, directions for pursuing further research for the implementation of appropriate control strategies. The authors opine that the information presented here would be highly beneficial for pursuing research in modeling and control of drying process using ANN     

Role of nanoscale AlN and InN for the microwave characteristics of AlGaN/(Al,In)N/GaN-based HEMT

A new AlGaN/GaN-based high electron mobility transistor (HEMT) is proposed and its micro-wave characteristics are discussed by introducing a nanoscale AlN or InN layer to study the potential improvement in their high frequency performance. The 2DEG transport mechanism including various sub-band calculations for both (Al,In) N-based HEMTs are also discussed in the paper. Apart from direct current characteristics of the proposed HEMT, various microwave parameters such as transconductance, unit current gain (h ₂₁ = 1) cut-off frequency (f _t ), high power-gain frequency (f _max). Masons available/stable gain and masons unilateral gain are also discussed for both devices to understand its suitable deployment in microwave frequency range.